Anton Bauer Ultralight

The Anton/Bauer Elipz System - Also please remember to select your Cable Adapter

ELIPZ 10K PACKAGE: (1) ELIPZ 10k battery (1) ELIPZ charger	EGRIPZ HANDHELD CAMERA SUPPORT Specification	ElightZ 6-VOLT ON-CAMERA LIGHT Specification	ELIPZ SYSTEM PACKAGE: (1) ELIPZ 10k battery , (1) ELIPZ charger (1) ElightZ, (1) EgripZ & (1) Cable
Less than USD300	Less than USD140	Less than USD135	Less than USD540

Chose your Elipz Cable Adapter here
	Cameras Makers	Type of Cameras	Elipz Cable Apater model	Price Less Than USD 77
	Sony	Sony PD-100/150/170, DCRVX2000/2100, HDR-FX1	SI-ADP-ELPZ.
	Sony	Sony HVR-ZI	SH-ADP-ELPZ.
	Panasonic	Panasonic AGHVX200, AGDVX100/100A/100B, DVC80/30	PA-ADP-ELPZ
	Canon	Canon GL1/2, XM2	CA-ADP-ELPZ

Elipz 10k battery

The innovative ElipZ 10k brings unmatched power density to handheld 7.2 volt battery operated cameras. Using the highest capacity lithium ion cells available, the 75Wh 10k can provide runtimes as much as 2 to 5 times that of the consumer OEM batteries supplied with the cameras. On a 10 watt camera load, the 10k will run over 7 1/2 hours, virtually a full shooting day! State indicator LEDs give a simple and easy to understand and constant indication that the battery has usable capacity (Blue) or requires charge (yellow). Constructed of high impact polycarbonate the ELIPZ 10K innovative under-camera mounting design allows batteries to be easily mounted and released with one hand. A quick release "shoe" attaches to the camera and the battery attaches directly and securely to the shoe. Lowering the center of gravity of the camera and providing an additional handhold without interfering with the camera operation, the lightweight ElipZ battery actually improves the comfort and handling characteristics of the camera. The appropriate adapter cable connects directly to the camera battery compartment and plugs into the PowerPlug connector on the ElipZ 10K. The ElipZ 10K mounts easily to the EgripZ support, or other camera support using the metal 1/4 20 insert at the bottom of the battery. The unique ElipZ power connector accepts both the camera adapter plug and the ElightZ PowerPlug. The 10k is capable at continuous loads of up to 6 amps - more than enough for a camera and light simultaneously.
ELIPZ 10K BATTERY	ELIPZ 10K BATTERY : 75Wh lithium ion battery (10,500 mAh @7.2V) - requires one of the following cables for your specific camera type. 6.4" X 3.2" X 1.7" (16.3 X 8.0 X 4.3 cm) 1.25lbs (567grams)

ELIPZ cable adapter	ELIPZ cable adapters: Model SI-ADP-ELPZ. ElipZ Adapter for Sony PD-100/150/170, DCRVX2000/2100, HDR-FX1 Model SH-ADP-ELPZ. Elipz Adapter for Sony HVR-ZI Model CA-ADP-ELPZ. ElipZ Adapter for Canon GL1/2, XM2 Model PA-ADP-ELPZ. ElipZ Adapter for Panasonic AGHVX200, AJDVX100/100A/100B, DVC80/30

ELIPZ CHARGER	The ElipZ battery charger weighs only 14 oz yet has the power to charge the ELIPZ 10K in as little as 6 hours. Simply plug the charger into the PowerPlug connector on the battery and the charger will automatically begin its charge routines. LEDs give easy to understand charge mode indication and features wide range (90-250VAC 50/60 Hz) mains input. Desktop design allows for easy travel and storage. Dimensions : 5.4" X 3.1" X 2.2" (13.7 x 7.8 x 5.5 cm) .85 lbs. (385 grams)

Complementing the new ELIPZ 10k battery, Anton/Bauer announced the ElightZ™ - the first 6-volt on-camera light specifically designed to work with a handheld camera battery without power converters, adapters or cumbersome belt packs.

“The Anton/Bauer Gold Mount pioneered the concept of sharing battery power with the camera, so it seemed natural that our new system should also provide this ability - and the ELIPZ 10k offers the power to handle both easily” said Mr. Minowa.

ElightZ weighs a mere 6 oz and draws only 10 watts (both 5 and 15 watt bulbs are available) but outputs more than 75 foot candles at 5 ft. Its unique folding design features a two-stage arm that can be adjusted to a wide array of positions to adjust light angles and avoid lens shadowing.

EgripZ

Anton/Bauer also introduced its new EgripZ™ camera support – a comfortable, flexible grip that offers virtually limitless operating positions to assist the videographer in stabilizing the camera without adding unnecessary weight or constraint.

New full-featured handheld cameras are sometimes handheld in name only, weighing up to six pounds. EgripZ attaches easily to any camera, weighing only 12 oz, providing the freedom to make creative camera movements without the impediment of added size, weight or tethering the camera to the operator’s body. A 1/4-20 mounting screw below enables the EgripZ to be mounted to a tripod, monopod or other camera support for quick and easy

stationary support when needed.

When professionals are asking more and more both from their cameras and from the accessories around the camera, Anton/Bauer’s new ELIPZ system answers with all new power, light and support in an integrated system.